Pull kunit updates from Shuah Khan:
- Make filter parameters configurable via Kconfig
- Add description of kunit.enable parameter to documentation
* tag 'linux_kselftest-kunit-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Make filter parameters configurable via Kconfig
Documentation: kunit: add description of kunit.enable parameter
When running parameterized tests, each test case is initialized with
kunit_init_test(). This function takes the test_case->log as a parameter
but it clears it via string_stream_clear() on each iteration.
This results in only the log from the last parameter being preserved in
the test_case->log and the results from the previous parameters are lost
from the debugfs entry.
Fix this by manually setting the param_test.log to the test_case->log
after it has been initialized. This prevents kunit_init_test() from
clearing the log on each iteration.
Link: https://lore.kernel.org/r/20251024190101.2091549-1-cmllamas@google.com
Fixes: 4b59300ba4 ("kunit: Add parent kunit for parameterized test context")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The previous implementation incorrectly assumed the original type of
'priv' was void**, leading to an unnecessary and misleading
cast. Correct the cast of the 'priv' pointer in test_dev_action() to
its actual type, long*, removing an unnecessary cast.
As an additional benefit, this fixes an out-of-bounds CHERI fault on
hardware with architectural capabilities. The original implementation
tried to store a capability-sized pointer using the priv
pointer. However, the priv pointer's capability only granted access to
the memory region of its original long type, leading to a bounds
violation since the size of a long is smaller than the size of a
capability. This change ensures that the pointer usage respects the
capabilities' bounds.
Link: https://lore.kernel.org/r/20251017092814.80022-1-florian.schmaus@codasip.com
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Florian Schmaus <florian.schmaus@codasip.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Various KUnit tests require PCI infrastructure to work. All normal
platforms enable PCI by default, but UML does not. Enabling PCI from
.kunitconfig files is problematic as it would not be portable. So in
commit 6fc3a8636a ("kunit: tool: Enable virtio/PCI by default on UML")
PCI was enabled by way of CONFIG_UML_PCI_OVER_VIRTIO=y. However
CONFIG_UML_PCI_OVER_VIRTIO requires additional configuration of
CONFIG_UML_PCI_OVER_VIRTIO_DEVICE_ID or will otherwise trigger a WARN() in
virtio_pcidev_init(). However there is no one correct value for
UML_PCI_OVER_VIRTIO_DEVICE_ID which could be used by default.
This warning is confusing when debugging test failures.
On the other hand, the functionality of CONFIG_UML_PCI_OVER_VIRTIO is not
used at all, given that it is completely non-functional as indicated by
the WARN() in question. Instead it is only used as a way to enable
CONFIG_UML_PCI which itself is not directly configurable.
Instead of going through CONFIG_UML_PCI_OVER_VIRTIO, introduce a custom
configuration option which enables CONFIG_UML_PCI without triggering
warnings or building dead code.
Link: https://lore.kernel.org/r/20250908-kunit-uml-pci-v2-1-d8eba5f73c9d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce example_params_test_with_init_dynamic_arr(). This new
KUnit test demonstrates directly assigning a dynamic parameter
array, using the kunit_register_params_array() macro, to a
parameterized test context.
It highlights the use of param_init() and param_exit() for
initialization and exit of a parameterized test, and their
registration to the test case with KUNIT_CASE_PARAM_WITH_INIT().
Link: https://lore.kernel.org/r/20250826091341.1427123-7-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add example_params_test_with_init() to illustrate how to manage
shared resources across a parameterized KUnit test. This example
showcases the use of the new param_init() function and its registration
to a test using the KUNIT_CASE_PARAM_WITH_INIT() macro.
Additionally, the test demonstrates how to directly pass a parameter array
to the parameterized test context via kunit_register_params_array()
and leveraging the Resource API for shared resource management.
Link: https://lore.kernel.org/r/20250826091341.1427123-6-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit parameterized tests currently support two primary methods f
or getting parameters:
1. Defining custom logic within a generate_params() function.
2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC()
macros with a pre-defined static array and passing
the created *_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating parameters
sequentially via generate_params() is inefficient or overly complex.
This patch addresses these limitations by adding a new `params_array`
field to `struct kunit`, of the type `kunit_params`. The
`struct kunit_params` is designed to store the parameter array itself,
along with essential metadata including the parameter count, parameter
size, and a get_description() function for providing custom descriptions
for individual parameters.
The `params_array` field can be populated by calling the new
kunit_register_params_array() macro from within a param_init() function.
This will register the array as part of the parameterized test context.
The user will then need to pass kunit_array_gen_params() to the
KUNIT_CASE_PARAM_WITH_INIT() macro as the generator function, if not
providing their own. kunit_array_gen_params() is a KUnit helper that will
use the registered array to generate parameters.
The arrays passed to KUNIT_ARRAY_PARAM(,DESC) will also be registered to
the parameterized test context for consistency as well as for higher
availability of the parameter count that will be used for outputting a KTAP
test plan for a parameterized test.
This modification provides greater flexibility to the KUnit framework,
allowing testers to easily register and utilize both dynamic and static
parameter arrays.
Link: https://lore.kernel.org/r/20250826091341.1427123-5-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Only output the test plan if using kunit_array_gen_params --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To enable more complex parameterized testing scenarios, the
generate_params() function needs additional context beyond just
the previously generated parameter. This patch modifies the
generate_params() function signature to include an extra
`struct kunit *test` argument, giving test users access to the
parameterized test context when generating parameters.
The `struct kunit *test` argument was added as the first parameter
to the function signature as it aligns with the convention of other
KUnit functions that accept `struct kunit *test` first. This also
mirrors the "this" or "self" reference found in object-oriented
programming languages.
This patch also modifies xe_pci_live_device_gen_param() in xe_pci.c
and nthreads_gen_params() in kcsan_test.c to reflect this signature
change.
Link: https://lore.kernel.org/r/20250826091341.1427123-4-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Catch some additional gen_params signatures in drm/xe/tests --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add (*param_init) and (*param_exit) function pointers to
`struct kunit_case`. Users will be able to set them via the new
KUNIT_CASE_PARAM_WITH_INIT() macro.
param_init/exit will be invoked by kunit_run_tests() once before and once
after the parameterized test, respectively. They will receive the
`struct kunit` that holds the parameterized test context; facilitating
init and exit for shared state.
This patch also sets param_init/exit to None in rust/kernel/kunit.rs.
Link: https://lore.kernel.org/r/20250826091341.1427123-3-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, KUnit parameterized tests lack a mechanism to share
resources across parameter runs because the same `struct kunit`
instance is cleaned up and reused for each run.
This patch introduces parameterized test context, enabling test
users to share resources between parameter runs. It also allows
setting up resources that need to be available for all parameter
runs only once, which is helpful in cases where setup is expensive.
To establish a parameterized test context, this patch adds a
parent pointer field to `struct kunit`. This allows resources added
to the parent `struct kunit` to be shared and accessible across all
parameter runs.
In kunit_run_tests(), the default `struct kunit` created is now
designated to act as the parameterized test context whenever a test
is parameterized.
Subsequently, a new `struct kunit` is made for each parameter run, and
its parent pointer is set to the `struct kunit` that holds the
parameterized test context.
Link: https://lore.kernel.org/r/20250826091341.1427123-2-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull kunit updates from Shuah Khan:
"Correct MODULE_IMPORT_NS() syntax documentation, make kunit_test
timeout configurable via a module parameter and a Kconfig option, fix
longest symbol length test, add a test for static stub, and adjust
kunit_test timeout based on test_{suite,case} speed"
* tag 'linux_kselftest-kunit-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix longest symbol length test
kunit: Make default kunit_test timeout configurable via both a module parameter and a Kconfig option
kunit: Adjust kunit_test timeout based on test_{suite,case} speed
kunit: Add test for static stub
Documentation: kunit: Correct MODULE_IMPORT_NS() syntax
Tests can allocate from virtual memory using kunit_vm_mmap(), which
transparently creates and attaches an mm_struct to the test runner if
one is not already attached. This is suitable for most cases, except for
when the code under test must access a task's mm before performing an
mmap. Expose kunit_attach_mm() as part of the interface for those
cases. This does not change the existing behavior.
Cc: David Gow <davidgow@google.com>
Signed-off-by: Tiffany Yang <ynaffit@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250714185321.2417234-4-ynaffit@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the in-kernel kunit test case timeout is 300 seconds. (There
is a separate timeout mechanism for the whole test execution in
kunit.py, but that's unrelated.) However, tests marked 'slow' or 'very
slow' may timeout, particularly on slower machines.
Implement a multiplier to the test-case timeout, so that slower tests
have longer to complete:
- DEFAULT -> 1x default timeout
- KUNIT_SPEED_SLOW -> 3x default timeout
- KUNIT_SPEED_VERY_SLOW -> 12x default timeout
A further change is planned to allow user configuration of the
default/base timeout to allow people with faster or slower machines to
adjust these to their use-cases.
Link: https://lore.kernel.org/r/20250614084711.2654593-2-davidgow@google.com
Signed-off-by: Ujwal Jain <ujwaljain@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct kunit_suite **" but the returned type will
be "struct kunit_suite * const *". Since it isn't generally possible
to remove the const qualifier, adjust the allocation type to match
the assignment.
Link: https://lore.kernel.org/r/20250426062433.work.124-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull kunit updates from Shuah Khan:
- fix user-after-free (UAF) bug in kunit_init_suite()
- add option to kunit tool to print just the summary of test results
- add option to kunit tool to print just the failed test results
- fix kunit_zalloc_skb() to use user passed in gfp value instead of
hardcoding GFP_KERNEL
- fixe kunit_zalloc_skb() kernel doc to include allocation flags
variable
- update KUnit email address for Brendan Higgins
- add LoongArch config to qemu_configs
- allow overriding the shutdown mode from qemu config
- enable shutdown in loongarch qemu_config
- fix potential null dereference in kunit_device_driver_test()
- fix debugfs to use IS_ERR() for alloc_string_stream() error check
* tag 'linux_kselftest-kunit-6.13-rc1-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: qemu_configs: loongarch: Enable shutdown
kunit: tool: Allow overriding the shutdown mode from qemu config
kunit: qemu_configs: Add LoongArch config
kunit: debugfs: Use IS_ERR() for alloc_string_stream() error check
kunit: Fix potential null dereference in kunit_device_driver_test()
MAINTAINERS: Update KUnit email address for Brendan Higgins
kunit: string-stream: Fix a UAF bug in kunit_init_suite()
kunit: tool: print failed tests only
kunit: tool: Only print the summary
kunit: skb: add gfp to kernel doc for kunit_zalloc_skb()
kunit: skb: use "gfp" variable instead of hardcoding GFP_KERNEL
The alloc_string_stream() function only returns ERR_PTR(-ENOMEM) on
failure and never returns NULL. Therefore, switching the error check in
the caller from IS_ERR_OR_NULL to IS_ERR improves clarity, indicating
that this function will return an error pointer (not NULL) when an
error occurs. This change avoids any ambiguity regarding the function's
return behavior.
Link: https://lore.kernel.org/lkml/Zy9deU5VK3YR+r9N@visitorckw-System-Product-Name
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
kunit_driver_create() accepts a name for the driver, but does not copy
it, so if that name is either on the stack, or otherwise freed, we end
up with a use-after-free when the driver is cleaned up.
Instead, strdup() the name, and manage it as another KUnit allocation.
As there was no existing kunit_kstrdup(), we add one. Further, add a
kunit_ variant of strdup_const() and kfree_const(), so we don't need to
allocate and manage the string in the majority of cases where it's a
constant.
However, these are inline functions, and is_kernel_rodata() only works
for built-in code. This causes problems in two cases:
- If kunit is built as a module, __{start,end}_rodata is not defined.
- If a kunit test using these functions is built as a module, it will
suffer the same fate.
This fixes a KASAN splat with overflow.overflow_allocation_test, when
built as a module.
Restrict the is_kernel_rodata() case to when KUnit is built as a module,
which fixes the first case, at the cost of losing the optimisation.
Also, make kunit_{kstrdup,kfree}_const non-inline, so that other modules
using them will not accidentally depend on is_kernel_rodata(). If KUnit
is built-in, they'll benefit from the optimisation, if KUnit is not,
they won't, but the string will be properly duplicated.
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Reported-by: Nico Pache <npache@redhat.com>
Closes: https://groups.google.com/g/kunit-dev/c/81V9b9QYON0
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Introduce KUnit resource wrappers around platform_driver_register(),
platform_device_alloc(), and platform_device_add() so that test authors
can register platform drivers/devices from their tests and have the
drivers/devices automatically be unregistered when the test is done.
This makes test setup code simpler when a platform driver or platform
device is needed. Add a few test cases at the same time to make sure the
APIs work as intended.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-6-sboyd@kernel.org
The alloc/copy code pattern is better consolidated to single kstrdup (and
kstrndup) calls instead. This gets rid of deprecated[1] strncpy() uses as
well. Replace one other strncpy() use with the more idiomatic strscpy().
Link: https://github.com/KSPP/linux/issues/90 [1]
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
For tests that need to allocate using vm_mmap() (e.g. usercopy and
execve), provide the interface to have the allocation tracked by KUnit
itself. This requires bringing up a placeholder userspace mm.
This combines my earlier attempt at this with Mark Rutland's version[1].
Normally alloc_mm() and arch_pick_mmap_layout() aren't exported for
modules, so export these only for KUnit testing.
Link: https://lore.kernel.org/lkml/20230321122514.1743889-2-mark.rutland@arm.com/ [1]
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
make allmodconfig && make W=1 C=1 reports in lib/kunit:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/kunit/kunit.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/kunit/kunit-test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/kunit/kunit-example-test.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are multiple assertion formatting functions in the `assert.c`
file, which are not covered with tests yet. Implement the KUnit test
for these functions.
The test consists of 11 test cases for the following functions:
1) 'is_literal'
2) 'is_str_literal'
3) 'kunit_assert_prologue', test case for multiple assert types
4) 'kunit_assert_print_msg'
5) 'kunit_unary_assert_format'
6) 'kunit_ptr_not_err_assert_format'
7) 'kunit_binary_assert_format'
8) 'kunit_binary_ptr_assert_format'
9) 'kunit_binary_str_assert_format'
10) 'kunit_assert_hexdump'
11) 'kunit_mem_assert_format'
The test aims at maximizing the branch coverage for the assertion
formatting functions.
As you can see, it covers some of the static helper functions as
well, so mark the static functions in `assert.c` as 'VISIBLE_IF_KUNIT'
and conditionally export them with EXPORT_SYMBOL_IF_KUNIT. Add the
corresponding definitions to `assert.h`.
Build the assert test when CONFIG_KUNIT_TEST is enabled, similar to
how it is done for the string stream test.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit c72a870926 added a mutex to prevent kunit tests from running
concurrently. Unfortunately that mutex gets locked during module load
regardless of whether the module actually has any kunit tests. This
causes a problem for kunit tests that might need to load other kernel
modules (e.g. gss_krb5_test loading the camellia module).
So check to see if there are actually any tests to run before locking
the kunit_run_lock mutex.
Fixes: c72a870926 ("kunit: add ability to run tests after boot using debugfs")
Reported-by: Nico Pache <npache@redhat.com>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The NULL dereference tests in kunit_fault deliberately trigger a kernel
BUG(), and therefore print the associated stack trace, even when the
test passes. This is both annoying (as it bloats the test output), and
can confuse some test harnesses, which assume any BUG() is a failure.
Allow these tests to be specifically disabled (without disabling all
of KUnit's other tests), by placing them behind the
CONFIG_KUNIT_FAULT_TEST Kconfig option. This is enabled by default, but
can be set to 'n' to disable the test. An empty 'kunit_fault' suite is
left behind, which will automatically be marked 'skipped'.
As the fault tests already were disabled under UML (as they weren't
compatible with its fault handling), we can simply adapt those
conditions, and add a dependency on !UML for our new option.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/928249cc-e027-4f7f-b43f-502f99a1ea63@roeck-us.net/
Fixes: 82b0beff3497 ("kunit: Add tests for fault")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kunit_init_device() should unregister the device on bus register error,
but mistakenly it tries to unregister the bus.
Unregister the device instead of the bus.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit's try-catch infrastructure now uses vfork_done, which is always
set to a valid completion when a kthread is created, but which is set to
NULL once the thread terminates. This creates a race condition, where
the kthread exits before we can wait on it.
Keep a copy of vfork_done, which is taken before we wake_up_process()
and so valid, and wait on that instead.
Fixes: 93533996100c ("kunit: Handle test faults")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/lkml/20240410102710.35911-1-naresh.kamboju@linaro.org/
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Acked-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously, when a kernel test thread crashed (e.g. NULL pointer
dereference, general protection fault), the KUnit test hanged for 30
seconds and exited with a timeout error.
Fix this issue by waiting on task_struct->vfork_done instead of the
custom kunit_try_catch.try_completion, and track the execution state by
initially setting try_result with -EINTR and only setting it to 0 if
the test passed.
Fix kunit_generic_run_threadfn_adapter() signature by returning 0
instead of calling kthread_complete_and_exit(). Because thread's exit
code is never checked, always set it to 0 to make it clear. To make
this explicit, export kthread_exit() for KUnit tests built as module.
Fix the -EINTR error message, which couldn't be reached until now.
This is tested with a following patch.
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Rae Moar <rmoar@google.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20240408074625.65017-5-mic@digikod.net
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit's executor_test logs the filter string in KUNIT_ASSERT_EQ_MSG(),
but passed a random character from the filter, rather than the whole
string.
This was found by annotating KUNIT_ASSERT_EQ_MSG() to let gcc validate
the format string.
Fixes: 76066f93f1 ("kunit: add tests for filtering attributes")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit d393acce7b ("drm/tests: Switch to kunit devices") switched the
DRM device creation helpers from an ad-hoc implementation to the new
kunit device creation helpers introduced in commit d03c720e03 ("kunit:
Add APIs for managing devices").
However, while the DRM helpers were using a platform_device, the kunit
helpers are using a dedicated bus and device type.
That situation creates small differences in the initialisation, and one
of them is that the kunit devices do not have the DMA masks setup. In
turn, this means that we can't do any kind of DMA buffer allocation
anymore, which creates a regression on some (downstream for now) tests.
Let's set up a default DMA mask that should work on any platform to fix
it.
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
