mirror of
https://github.com/torvalds/linux.git
synced 2025-12-07 20:06:24 +00:00
ARM: dts: stm32: Add DHCOR based Testbench board
Add DT for DHCOR Testbench board, which is a testbench for testing of DHCOR SoM during manufacturing. This is effectively a trimmed down version of AV96 board with CSI-2 bridge, HDMI bridge, WiFi, Audio and LEDs removed and used as GPIOs instead. Furthermore, the PMIC Buck3 is always configured from PMIC NVM to cater for both 1V8 and 3V3 SoM variant. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This commit is contained in:
Marek Vasut
committed by
Alexandre Torgue
Alexandre Torgue
parent
2129721244
commit
c8ce0dd755
@@ -1214,6 +1214,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
|
||||
stm32mp151a-prtt1a.dtb \
|
||||
stm32mp151a-prtt1c.dtb \
|
||||
stm32mp151a-prtt1s.dtb \
|
||||
stm32mp151a-dhcor-testbench.dtb \
|
||||
stm32mp153c-dhcom-drc02.dtb \
|
||||
stm32mp153c-dhcor-drc-compact.dtb \
|
||||
stm32mp157a-avenger96.dtb \
|
||||
|
||||
17
arch/arm/boot/dts/stm32mp151a-dhcor-testbench.dts
Normal file
17
arch/arm/boot/dts/stm32mp151a-dhcor-testbench.dts
Normal file
@@ -0,0 +1,17 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) 2022 Marek Vasut <marex@denx.de>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "stm32mp151.dtsi"
|
||||
#include "stm32mp15xx-dhcor-som.dtsi"
|
||||
#include "stm32mp15xx-dhcor-testbench.dtsi"
|
||||
|
||||
/ {
|
||||
model = "DH electronics STM32MP151A DHCOR Testbench";
|
||||
compatible = "dh,stm32mp151a-dhcor-testbench",
|
||||
"dh,stm32mp151a-dhcor-som",
|
||||
"st,stm32mp151";
|
||||
};
|
||||
171
arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
Normal file
171
arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
Normal file
@@ -0,0 +1,171 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) 2022 Marek Vasut <marex@denx.de>
|
||||
*/
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
ethernet0 = ðernet0;
|
||||
mmc0 = &sdmmc1;
|
||||
mmc1 = &sdmmc2;
|
||||
serial0 = &uart4;
|
||||
serial1 = &uart7;
|
||||
spi0 = &qspi;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
sd_switch: regulator-sd_switch {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "sd_switch";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
regulator-type = "voltage";
|
||||
regulator-always-on;
|
||||
|
||||
gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <0>;
|
||||
states = <1800000 0x1>,
|
||||
<2900000 0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&adc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&adc12_ain_pins_b>;
|
||||
vdd-supply = <&vdd>;
|
||||
vdda-supply = <&vdda>;
|
||||
vref-supply = <&vdda>;
|
||||
status = "okay";
|
||||
|
||||
adc1: adc@0 {
|
||||
st,adc-channels = <0 1 6>;
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
adc2: adc@100 {
|
||||
st,adc-channels = <0 1 2>;
|
||||
st,min-sample-time-nsecs = <5000>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
ðernet0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ðernet0_rgmii_pins_c>;
|
||||
pinctrl-1 = <ðernet0_rgmii_sleep_pins_c>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
phy-mode = "rgmii";
|
||||
max-speed = <1000>;
|
||||
phy-handle = <&phy0>;
|
||||
|
||||
mdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
|
||||
reset-delay-us = <1000>;
|
||||
reset-post-delay-us = <1000>;
|
||||
|
||||
phy0: ethernet-phy@7 {
|
||||
reg = <7>;
|
||||
|
||||
rxc-skew-ps = <1500>;
|
||||
rxdv-skew-ps = <540>;
|
||||
rxd0-skew-ps = <420>;
|
||||
rxd1-skew-ps = <420>;
|
||||
rxd2-skew-ps = <420>;
|
||||
rxd3-skew-ps = <420>;
|
||||
|
||||
txc-skew-ps = <1440>;
|
||||
txen-skew-ps = <540>;
|
||||
txd0-skew-ps = <420>;
|
||||
txd1-skew-ps = <420>;
|
||||
txd2-skew-ps = <420>;
|
||||
txd3-skew-ps = <420>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
|
||||
pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
|
||||
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
|
||||
cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
|
||||
disable-wp;
|
||||
st,sig-dir;
|
||||
st,neg-edge;
|
||||
st,use-ckin;
|
||||
bus-width = <4>;
|
||||
vmmc-supply = <&vdd_sd>;
|
||||
vqmmc-supply = <&sd_switch>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc2 {
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_c>;
|
||||
pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_c>;
|
||||
pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_c>;
|
||||
bus-width = <8>;
|
||||
mmc-ddr-1_8v;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
st,neg-edge;
|
||||
vmmc-supply = <&v3v3>;
|
||||
vqmmc-supply = <&v3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins_b>;
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart7 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart7_pins_a>;
|
||||
uart-has-rtscts;
|
||||
/delete-property/dmas;
|
||||
/delete-property/dma-names;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh_ehci {
|
||||
phys = <&usbphyc_port0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh_ohci {
|
||||
phys = <&usbphyc_port0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg_hs {
|
||||
pinctrl-0 = <&usbotg_hs_pins_a>;
|
||||
pinctrl-names = "default";
|
||||
phy-names = "usb2-phy";
|
||||
phys = <&usbphyc_port1 0>;
|
||||
status = "okay";
|
||||
vbus-supply = <&vbus_otg>;
|
||||
};
|
||||
|
||||
&usbphyc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbphyc_port0 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
|
||||
&usbphyc_port1 {
|
||||
phy-supply = <&vdd_usb>;
|
||||
};
|
||||
Reference in New Issue
Block a user