admin/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2025-12-07 20:06:24 +00:00
Code Issues Packages Projects Releases Wiki Activity

arm64: dts: qcom: x1e80100-vivobook-s15: Enable USB-A ports

Browse Source 
The asus vivobook has 2 USB type A ports on the right side, enable them

Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://lore.kernel.org/r/20250119-usb_a_micro_sd-v1-1-01eb7502ae05@hotmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Maud Spierings
2025-01-19 15:50:51 +01:00
committed by Bjorn Andersson
parent 4bf9fac3a8
commit c0c46eea24
1 changed files with 102 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

103
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
View File

@@ -192,6 +192,20 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4b_1p8: ldo4 {
regulator-name = "vreg_l4b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13b_3p0: ldo13 {
regulator-name = "vreg_l13b_3p0";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_3p0: ldo14 {
regulator-name = "vreg_l14b_3p0";
regulator-min-microvolt = <3072000>;
@@ -209,6 +223,13 @@
vdd-l3-supply = <&vreg_s1f_0p7>;
vdd-s4-supply = <&vph_pwr>;
vreg_l3c_0p8: ldo3 {
regulator-name = "vreg_l3c_0p8";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s4c_1p8: smps4 {
regulator-name = "vreg_s4c_1p8";
regulator-min-microvolt = <1856000>;
@@ -401,7 +422,35 @@
wakeup-source;
};
/* EC? @ 0x5b, 0x76 */
eusb3_repeater: redriver@47 {
compatible = "nxp,ptn3222";
reg = <0x47>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb3_reset_n>;
pinctrl-names = "default";
};
eusb6_repeater: redriver@4f {
compatible = "nxp,ptn3222";
reg = <0x4f>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb6_reset_n>;
pinctrl-names = "default";
};
/* EC @ 0x76 */
};
&i2c7 {
@@ -563,6 +612,22 @@
bias-disable;
};
eusb3_reset_n: eusb3-reset-n-state {
pins = "gpio6";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
output-low;
};
eusb6_reset_n: eusb6-reset-n-state {
pins = "gpio184";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
output-low;
};
hall_int_n_default: hall-int-n-state {
pins = "gpio92";
function = "gpio";
@@ -698,3 +763,39 @@
&usb_1_ss1_qmpphy_out {
remote-endpoint = <&pmic_glink_ss1_ss_in>;
};
&usb_mp {
status = "okay";
};
&usb_mp_hsphy0 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
phys = <&eusb6_repeater>;
status = "okay";
};
&usb_mp_hsphy1 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
phys = <&eusb3_repeater>;
status = "okay";
};
&usb_mp_qmpphy0 {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3c_0p8>;
status = "okay";
};
&usb_mp_qmpphy1 {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3c_0p8>;
status = "okay";
};