admin/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux.git synced 2025-12-07 20:06:24 +00:00
Code Issues Packages Projects Releases Wiki Activity

arm64: dts: qcom: x1e78100-qcp: Enable Type-A USB ports labeled 3 and 4/6

Browse Source 
The X Elite QCP board has 3 USB-A ports. The ones labed as USB3 and
USB4/6 are both connected to the multiport controller, each one via a
separate NXP PTN3222 eUSB2-to-USB2 redriver to the eUSB2 PHY for
High-Speed support, with a dedicated QMP PHY for SuperSpeed support.

Describe these two redrivers and enable each pair of PHYs along with the
USB controller, all in order to enable support for these 2 USB-A ports.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241202-x1e80100-qcp-t14-enable-usb-type-a-ports-v2-2-7360ed65c769@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Abel Vesa
2024-12-02 11:23:18 +02:00
committed by Bjorn Andersson
parent ffbf3a8be7
commit 9f53c36119
1 changed files with 86 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

86
arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
View File

@@ -616,6 +616,40 @@
};
};
&i2c5 {
clock-frequency = <400000>;
status = "okay";
eusb3_repeater: redriver@47 {
compatible = "nxp,ptn3222";
reg = <0x47>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb3_reset_n>;
pinctrl-names = "default";
};
eusb6_repeater: redriver@4f {
compatible = "nxp,ptn3222";
reg = <0x4f>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb6_reset_n>;
pinctrl-names = "default";
};
};
&lpass_tlmm {
spkr_01_sd_n_active: spkr-01-sd-n-active-state {
pins = "gpio12";
@@ -840,6 +874,22 @@
bias-disable;
};
eusb3_reset_n: eusb3-reset-n-state {
pins = "gpio6";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
eusb6_reset_n: eusb6-reset-n-state {
pins = "gpio184";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
nvme_reg_en: nvme-reg-en-state {
pins = "gpio18";
function = "gpio";
@@ -1009,3 +1059,39 @@
&usb_1_ss2_qmpphy_out {
remote-endpoint = <&pmic_glink_ss2_ss_in>;
};
&usb_mp {
status = "okay";
};
&usb_mp_hsphy0 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
phys = <&eusb6_repeater>;
status = "okay";
};
&usb_mp_hsphy1 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
phys = <&eusb3_repeater>;
status = "okay";
};
&usb_mp_qmpphy0 {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3c_0p8>;
status = "okay";
};
&usb_mp_qmpphy1 {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3c_0p8>;
status = "okay";
};