sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig

Like many Kconfig symbols, SCHED_{SMT,CLUSTER,MC} are duplicated across arch/*/Kconfig. Try and clean up a little. Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> # powerpc Link: https://lkml.kernel.org/r/20250826094358.GG3245006@noisy.programming.kicks-ass.net
2025-12-07 20:06:24 +00:00 · 2025-08-26 11:08:57 +02:00
parent 91c614f09a
commit 7bd291abe2
11 changed files with 60 additions and 145 deletions
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -41,6 +41,44 @@ config HOTPLUG_SMT
 config SMT_NUM_THREADS_DYNAMIC
 	bool

+config ARCH_SUPPORTS_SCHED_SMT
+	bool
+
+config ARCH_SUPPORTS_SCHED_CLUSTER
+	bool
+
+config ARCH_SUPPORTS_SCHED_MC
+	bool
+
+config SCHED_SMT
+	bool "SMT (Hyperthreading) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_SMT
+	default y
+	help
+	  Improves the CPU scheduler's decision making when dealing with
+	  MultiThreading at a cost of slightly increased overhead in some
+	  places. If unsure say N here.
+
+config SCHED_CLUSTER
+	bool "Cluster scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_CLUSTER
+	default y
+	help
+	  Cluster scheduler support improves the CPU scheduler's decision
+	  making when dealing with machines that have clusters of CPUs.
+	  Cluster usually means a couple of CPUs which are placed closely
+	  by sharing mid-level caches, last-level cache tags or internal
+	  busses.
+
+config SCHED_MC
+	bool "Multi-Core Cache (MC) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_MC
+	default y
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
 # Selected by HOTPLUG_CORE_SYNC_DEAD or HOTPLUG_CORE_SYNC_FULL
 config HOTPLUG_CORE_SYNC
 	bool
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -941,28 +941,14 @@ config IRQSTACKS
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
 	depends on SMP && CPU_V7
+	select ARCH_SUPPORTS_SCHED_MC
+	select ARCH_SUPPORTS_SCHED_SMT
 	default y
 	help
 	  Support ARM cpu topology definition. The MPIDR register defines
 	  affinity between processors which is then used to describe the cpu
 	  topology of an ARM System.

-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config HAVE_ARM_SCU
 	bool
 	help
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -108,6 +108,9 @@ config ARM64
 	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_SUPPORTS_HUGE_PFNMAP if TRANSPARENT_HUGEPAGE
 	select ARCH_SUPPORTS_RT
+	select ARCH_SUPPORTS_SCHED_SMT
+	select ARCH_SUPPORTS_SCHED_CLUSTER
+	select ARCH_SUPPORTS_SCHED_MC
 	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
 	select ARCH_WANT_DEFAULT_BPF_JIT
@@ -1505,29 +1508,6 @@ config CPU_LITTLE_ENDIAN

 endchoice

-config SCHED_MC
-	bool "Multi-core scheduler support"
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_CLUSTER
-	bool "Cluster scheduler support"
-	help
-	  Cluster scheduler support improves the CPU scheduler's decision
-	  making when dealing with machines that have clusters of CPUs.
-	  Cluster usually means a couple of CPUs which are placed closely
-	  by sharing mid-level caches, last-level cache tags or internal
-	  busses.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-4096)"
 	range 2 4096
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -70,6 +70,8 @@ config LOONGARCH
 	select ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select ARCH_SUPPORTS_RT
+	select ARCH_SUPPORTS_SCHED_SMT if SMP
+	select ARCH_SUPPORTS_SCHED_MC  if SMP
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_MEMTEST
@@ -448,23 +450,6 @@ config EFI_STUB
 	  This kernel feature allows the kernel to be loaded directly by
 	  EFI firmware without the use of a bootloader.

-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on SMP
-	default y
-	help
-	  Improves scheduler's performance when there are multiple
-	  threads in one physical core.
-
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on SMP
-	default y
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places.
-
 config SMP
 	bool "Multi-Processing support"
 	help
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2223,7 +2223,7 @@ config MIPS_MT_SMP
 	select SMP
 	select SMP_UP
 	select SYS_SUPPORTS_SMP
-	select SYS_SUPPORTS_SCHED_SMT
+	select ARCH_SUPPORTS_SCHED_SMT
 	select MIPS_PERF_SHARED_TC_COUNTERS
 	help
 	  This is a kernel model which is known as SMVP. This is supported
@@ -2235,18 +2235,6 @@ config MIPS_MT_SMP
 config MIPS_MT
 	bool

-config SCHED_SMT
-	bool "SMT (multithreading) scheduler support"
-	depends on SYS_SUPPORTS_SCHED_SMT
-	default n
-	help
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with MIPS MT enabled cores at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SYS_SUPPORTS_SCHED_SMT
-	bool
-
 config SYS_SUPPORTS_MULTITHREADING
 	bool

@@ -2318,7 +2306,7 @@ config MIPS_CPS
 	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
 	select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
 	select SYS_SUPPORTS_HOTPLUG_CPU
-	select SYS_SUPPORTS_SCHED_SMT if CPU_MIPSR6
+	select ARCH_SUPPORTS_SCHED_SMT if CPU_MIPSR6
 	select SYS_SUPPORTS_SMP
 	select WEAK_ORDERING
 	select GENERIC_IRQ_MIGRATION if HOTPLUG_CPU
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -44,6 +44,7 @@ config PARISC
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_ARCH_TOPOLOGY if SMP
+	select ARCH_SUPPORTS_SCHED_MC if SMP && PA8X00
 	select GENERIC_CPU_DEVICES if !SMP
 	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select SYSCTL_ARCH_UNALIGN_ALLOW
@@ -319,14 +320,6 @@ config SMP

 	  If you don't know what to do here, say N.

-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on GENERIC_ARCH_TOPOLOGY && PA8X00
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
 	default y
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -170,6 +170,9 @@ config PPC
 	select ARCH_STACKWALK
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_DEBUG_PAGEALLOC	if PPC_BOOK3S || PPC_8xx
+	select ARCH_SUPPORTS_SCHED_MC		if SMP
+	select ARCH_SUPPORTS_SCHED_SMT		if PPC64 && SMP
+	select SCHED_MC				if ARCH_SUPPORTS_SCHED_MC
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF		if PPC64
 	select ARCH_USE_MEMTEST
@@ -963,18 +966,6 @@ config PPC_PROT_SAO_LPAR
 config PPC_COPRO_BASE
 	bool

-config SCHED_SMT
-	bool "SMT (Hyperthreading) scheduler support"
-	depends on PPC64 && SMP
-	help
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with POWER5 cpus at a cost of slightly increased
-	  overhead in some places. If unsure say N here.
-
-config SCHED_MC
-	def_bool y
-	depends on SMP
-
 config PPC_DENORMALISATION
 	bool "PowerPC denormalisation exception handling"
 	depends on PPC_BOOK3S_64
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -72,6 +72,7 @@ config RISCV
 	select ARCH_SUPPORTS_PER_VMA_LOCK if MMU
 	select ARCH_SUPPORTS_RT
 	select ARCH_SUPPORTS_SHADOW_CALL_STACK if HAVE_SHADOW_CALL_STACK
+	select ARCH_SUPPORTS_SCHED_MC if SMP
 	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
 	select ARCH_USE_MEMTEST
 	select ARCH_USE_QUEUED_RWLOCKS
@@ -453,14 +454,6 @@ config SMP

 	  If you don't know what to do here, say N.

-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on SMP
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-512)"
 	depends on SMP
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -547,15 +547,11 @@ config NODES_SHIFT
 	depends on NUMA
 	default "1"

-config SCHED_SMT
-	def_bool n
-
-config SCHED_MC
-	def_bool n
-
 config SCHED_TOPOLOGY
 	def_bool y
 	prompt "Topology scheduler support"
+	select ARCH_SUPPORTS_SCHED_SMT
+	select ARCH_SUPPORTS_SCHED_MC
 	select SCHED_SMT
 	select SCHED_MC
 	help
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -110,6 +110,8 @@ config SPARC64
 	select HAVE_SETUP_PER_CPU_AREA
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
 	select NEED_PER_CPU_PAGE_FIRST_CHUNK
+	select ARCH_SUPPORTS_SCHED_SMT if SMP
+	select ARCH_SUPPORTS_SCHED_MC  if SMP

 config ARCH_PROC_KCORE_TEXT
 	def_bool y
@@ -288,24 +290,6 @@ if SPARC64 || COMPILE_TEST
 source "kernel/power/Kconfig"
 endif

-config SCHED_SMT
-	bool "SMT (Hyperthreading) scheduler support"
-	depends on SPARC64 && SMP
-	default y
-	help
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with SPARC cpus at a cost of slightly increased overhead
-	  in some places. If unsure say N here.
-
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on SPARC64 && SMP
-	default y
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
 config CMDLINE_BOOL
 	bool "Default bootloader kernel arguments"
 	depends on SPARC64
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -330,6 +330,10 @@ config X86
 	imply IMA_SECURE_AND_OR_TRUSTED_BOOT    if EFI
 	select HAVE_DYNAMIC_FTRACE_NO_PATCHABLE
 	select ARCH_SUPPORTS_PT_RECLAIM		if X86_64
+	select ARCH_SUPPORTS_SCHED_SMT		if SMP
+	select SCHED_SMT			if SMP
+	select ARCH_SUPPORTS_SCHED_CLUSTER	if SMP
+	select ARCH_SUPPORTS_SCHED_MC		if SMP

 config INSTRUCTION_DECODER
 	def_bool y
@@ -1031,29 +1035,6 @@ config NR_CPUS
 	  This is purely to save memory: each supported CPU adds about 8KB
 	  to the kernel image.

-config SCHED_CLUSTER
-	bool "Cluster scheduler support"
-	depends on SMP
-	default y
-	help
-	  Cluster scheduler support improves the CPU scheduler's decision
-	  making when dealing with machines that have clusters of CPUs.
-	  Cluster usually means a couple of CPUs which are placed closely
-	  by sharing mid-level caches, last-level cache tags or internal
-	  busses.
-
-config SCHED_SMT
-	def_bool y if SMP
-
-config SCHED_MC
-	def_bool y
-	prompt "Multi-core scheduler support"
-	depends on SMP
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
 config SCHED_MC_PRIO
 	bool "CPU core priorities scheduler support"
 	depends on SCHED_MC