firmware: stratix10-svc: Add definition for voltage and temperature sensor

Add entry in Stratix 10 Service Layer to support temperature and voltage
sensor.

Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

drivers/firmware/stratix10-svc.c

@@ -34,7 +34,7 @@
  * timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC.
  */
 #define SVC_NUM_DATA_IN_FIFO			32
-#define SVC_NUM_CHANNEL				3
+#define SVC_NUM_CHANNEL				4
 #define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS	200
 #define FPGA_CONFIG_STATUS_TIMEOUT_SEC		30
 #define BYTE_TO_WORD_SIZE              4
@@ -341,6 +341,8 @@ static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
 	case COMMAND_RSU_MAX_RETRY:
 	case COMMAND_RSU_DCMF_STATUS:
 	case COMMAND_FIRMWARE_VERSION:
+	case COMMAND_HWMON_READTEMP:
+	case COMMAND_HWMON_READVOLT:
 		cb_data->status = BIT(SVC_STATUS_OK);
 		cb_data->kaddr1 = &res.a1;
 		break;
@@ -525,7 +527,17 @@ static int svc_normal_to_secure_thread(void *data)
 			a1 = (unsigned long)pdata->paddr;
 			a2 = 0;
 			break;
-
+		/* for HWMON */
+		case COMMAND_HWMON_READTEMP:
+			a0 = INTEL_SIP_SMC_HWMON_READTEMP;
+			a1 = pdata->arg[0];
+			a2 = 0;
+			break;
+		case COMMAND_HWMON_READVOLT:
+			a0 = INTEL_SIP_SMC_HWMON_READVOLT;
+			a1 = pdata->arg[0];
+			a2 = 0;
+			break;
 		/* for polling */
 		case COMMAND_POLL_SERVICE_STATUS:
 			a0 = INTEL_SIP_SMC_SERVICE_COMPLETED;
@@ -1197,6 +1209,11 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
 	chans[2].name = SVC_CLIENT_FCS;
 	spin_lock_init(&chans[2].lock);
 
+	chans[3].scl = NULL;
+	chans[3].ctrl = controller;
+	chans[3].name = SVC_CLIENT_HWMON;
+	spin_lock_init(&chans[3].lock);
+
 	list_add_tail(&controller->node, &svc_ctrl);
 	platform_set_drvdata(pdev, controller);
 

include/linux/firmware/intel/stratix10-smc.h

@@ -620,4 +620,38 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
 #define INTEL_SIP_SMC_FCS_GET_PROVISION_DATA \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FCS_GET_PROVISION_DATA)
 
+/**
+ * Request INTEL_SIP_SMC_HWMON_READTEMP
+ * Sync call to request temperature
+ *
+ * Call register usage:
+ * a0 Temperature Channel
+ * a1-a7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ * a1 Temperature Value
+ * a2-a3 not used
+ */
+#define INTEL_SIP_SMC_FUNCID_HWMON_READTEMP 32
+#define INTEL_SIP_SMC_HWMON_READTEMP \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HWMON_READTEMP)
+
+/**
+ * Request INTEL_SIP_SMC_HWMON_READVOLT
+ * Sync call to request voltage
+ *
+ * Call register usage:
+ * a0 Voltage Channel
+ * a1-a7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ * a1 Voltage Value
+ * a2-a3 not used
+ */
+#define INTEL_SIP_SMC_FUNCID_HWMON_READVOLT 33
+#define INTEL_SIP_SMC_HWMON_READVOLT \
+	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HWMON_READVOLT)
+
 #endif

include/linux/firmware/intel/stratix10-svc-client.h

@@ -11,12 +11,14 @@
  *
  * fpga: for FPGA configuration
  * rsu: for remote status update
+ * hwmon: for hardware monitoring (voltage and temperature)
  */
 #define SVC_CLIENT_FPGA			"fpga"
 #define SVC_CLIENT_RSU			"rsu"
 #define SVC_CLIENT_FCS			"fcs"
+#define SVC_CLIENT_HWMON		"hwmon"
 
-/*
+/**
  * Status of the sent command, in bit number
  *
  * SVC_STATUS_OK:
@@ -70,6 +72,7 @@
 #define SVC_RSU_REQUEST_TIMEOUT_MS              300
 #define SVC_FCS_REQUEST_TIMEOUT_MS		2000
 #define SVC_COMPLETED_TIMEOUT_MS		30000
+#define SVC_HWMON_REQUEST_TIMEOUT_MS		300
 
 struct stratix10_svc_chan;
 
@@ -171,6 +174,9 @@ enum stratix10_svc_command_code {
 	COMMAND_MBOX_SEND_CMD = 100,
 	/* Non-mailbox SMC Call */
 	COMMAND_SMC_SVC_VERSION = 200,
+	/* for HWMON */
+	COMMAND_HWMON_READTEMP,
+	COMMAND_HWMON_READVOLT
 };
 
 /**