mirror of
https://github.com/torvalds/linux.git
synced 2025-12-07 20:06:24 +00:00
arm64: dts: qcom: msm8953: Add device tree for Xiaomi Mi A2 Lite
Add device tree for the Xiaomi Mi A2 Lite (daisy) smartphone. This device is based on Snapdragon 625 (msm8953) SoC. Signed-off-by: Alejandro Tafalla <atafalla@dnyon.com> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221207-msm8953-6-1-next-dtbs-v3-v3-5-a64b3b0af0eb@z3ntu.xyz
This commit is contained in:
Alejandro Tafalla
committed by
Bjorn Andersson
Bjorn Andersson
parent
4ccd0dd6a3
commit
38d779c263
@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb
|
||||
|
||||
325
arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
Normal file
325
arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
Normal file
@@ -0,0 +1,325 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2022, Alejandro Tafalla
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8953.dtsi"
|
||||
#include "pm8953.dtsi"
|
||||
#include "pmi8950.dtsi"
|
||||
|
||||
/delete-node/ &adsp_fw_mem;
|
||||
/delete-node/ &qseecom_mem;
|
||||
/delete-node/ &wcnss_fw_mem;
|
||||
|
||||
/ {
|
||||
model = "Xiaomi Mi A2 Lite";
|
||||
compatible = "xiaomi,daisy", "qcom,msm8953";
|
||||
chassis-type = "handset";
|
||||
qcom,msm-id = <293 0>;
|
||||
qcom,board-id= <0x1000b 0x9>;
|
||||
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
framebuffer@90001000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0 0x90001000 0 (1920 * 2280 * 3)>;
|
||||
|
||||
width = <1080>;
|
||||
height = <2280>;
|
||||
stride = <(1080 * 3)>;
|
||||
format = "r8g8b8";
|
||||
|
||||
power-domains = <&gcc MDSS_GDSC>;
|
||||
|
||||
clocks = <&gcc GCC_MDSS_AHB_CLK>,
|
||||
<&gcc GCC_MDSS_AXI_CLK>,
|
||||
<&gcc GCC_MDSS_VSYNC_CLK>,
|
||||
<&gcc GCC_MDSS_MDP_CLK>,
|
||||
<&gcc GCC_MDSS_BYTE0_CLK>,
|
||||
<&gcc GCC_MDSS_PCLK0_CLK>,
|
||||
<&gcc GCC_MDSS_ESC0_CLK>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_key_default>;
|
||||
|
||||
key-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
qseecom_mem: qseecom@84a00000 {
|
||||
reg = <0x0 0x84a00000 0x0 0x1900000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_fw_mem: adsp@8d600000 {
|
||||
reg = <0x0 0x8d600000 0x0 0x1200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wcnss_fw_mem: wcnss@8e800000 {
|
||||
reg = <0x0 0x8e800000 0x0 0x700000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* We bitbang on &i2c_4 because BLSP is protected by TZ as sensors are
|
||||
* normally proxied via ADSP firmware. GPIOs aren't protected.
|
||||
*/
|
||||
i2c-sensors {
|
||||
compatible = "i2c-gpio";
|
||||
sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
|
||||
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
imu@6a {
|
||||
compatible = "st,lsm6dsl";
|
||||
reg = <0x6a>;
|
||||
vdd-supply = <&pm8953_l10>;
|
||||
vddio-supply = <&pm8953_l6>;
|
||||
mount-matrix = "-1", "0", "0",
|
||||
"0", "-1", "0",
|
||||
"0", "0", "1";
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&hsusb_phy {
|
||||
vdd-supply = <&pm8953_l3>;
|
||||
vdda-pll-supply = <&pm8953_l7>;
|
||||
vdda-phy-dpdm-supply = <&pm8953_l13>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c_2 {
|
||||
status = "okay";
|
||||
|
||||
speaker_codec: audio-codec@3a {
|
||||
compatible = "maxim,max98927";
|
||||
reg = <0x3a>;
|
||||
|
||||
reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vmon-slot-no = <1>;
|
||||
imon-slot-no = <1>;
|
||||
interleave_mode = <0>;
|
||||
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_3 {
|
||||
status = "okay";
|
||||
|
||||
touchscreen@38 {
|
||||
compatible = "edt,edt-ft5406";
|
||||
reg = <0x38>;
|
||||
|
||||
interrupt-parent = <&tlmm>;
|
||||
interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&pm8953_l10>;
|
||||
|
||||
touchscreen-size-x = <1080>;
|
||||
touchscreen-size-y = <2280>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8953_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmi8950_wled {
|
||||
qcom,current-limit-microamp = <20000>;
|
||||
qcom,num-strings = <2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
regulators {
|
||||
compatible = "qcom,rpm-pm8953-regulators";
|
||||
|
||||
vdd_s1-supply = <&vph_pwr>;
|
||||
vdd_s2-supply = <&vph_pwr>;
|
||||
vdd_s3-supply = <&vph_pwr>;
|
||||
vdd_s4-supply = <&vph_pwr>;
|
||||
vdd_s5-supply = <&vph_pwr>;
|
||||
vdd_s6-supply = <&vph_pwr>;
|
||||
vdd_s7-supply = <&vph_pwr>;
|
||||
vdd_l1-supply = <&pm8953_s3>;
|
||||
vdd_l2_l3-supply = <&pm8953_s3>;
|
||||
vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
|
||||
vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
|
||||
vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
|
||||
|
||||
pm8953_s1: s1 {
|
||||
regulator-min-microvolt = <863000>;
|
||||
regulator-max-microvolt = <1152000>;
|
||||
};
|
||||
|
||||
pm8953_s3: s3 {
|
||||
regulator-min-microvolt = <1224000>;
|
||||
regulator-max-microvolt = <1224000>;
|
||||
};
|
||||
|
||||
pm8953_s4: s4 {
|
||||
regulator-min-microvolt = <1896000>;
|
||||
regulator-max-microvolt = <2048000>;
|
||||
};
|
||||
|
||||
pm8953_l1: l1 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
};
|
||||
|
||||
pm8953_l2: l2 {
|
||||
regulator-min-microvolt = <975000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
|
||||
pm8953_l3: l3 {
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <925000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
|
||||
pm8953_l5: l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8953_l6: l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pm8953_l7: l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
};
|
||||
|
||||
pm8953_l8: l8 {
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
pm8953_l9: l9 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8953_l10: l10 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pm8953_l11: l11 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
pm8953_l12: l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
pm8953_l13: l13 {
|
||||
regulator-min-microvolt = <3125000>;
|
||||
regulator-max-microvolt = <3125000>;
|
||||
};
|
||||
|
||||
pm8953_l16: l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8953_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
pm8953_l19: l19 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
};
|
||||
|
||||
pm8953_l22: l22 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
pm8953_l23: l23 {
|
||||
regulator-min-microvolt = <975000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
vmmc-supply = <&pm8953_l8>;
|
||||
vqmmc-supply = <&pm8953_l5>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
vmmc-supply = <&pm8953_l11>;
|
||||
vqmmc-supply = <&pm8953_l12>;
|
||||
|
||||
cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
|
||||
};
|
||||
|
||||
&uart_0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart_console_active>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_dwc3 {
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
Reference in New Issue
Block a user